Fast-Vac R-Series™Vacuum Loaders…
are heavy-duty, powerful, efficient, and dust free industrial vacuum modules, integrally mounted on a suitable truck chassis for vacuum removal of virtually any dry material, sludges, slurries, and liquids from remote or inaccessible locations. It is easy to maneuver for a one man operation. These heavy duty Industrial vacuum loaders have a wide range of other applications.
Each unit can come completely equipped with many options. such as the Fast–Vac™ Hydro package including a 270 degree articulating boom as well as a high-pressure washer system ran by a 3500 P.S.I. Hydraulic Cat Pump. Every Fast-Vac can be mounted on your chassis of choice including Remanufactured units. When the remanufactured units are completed they are zero hour machines.R-Series™ Photo Gallery
R-Series™ IVL Specifications
- At 5000 icfm 80 bags, 10.3 to 1 air to cloth ratio
- At 4000 icfm 80 bags, 8.3 to 1 air to cloth ratio
- At 3000 icfm 80 bags, 6.2 to 1 air to cloth ratio
Bags are installed with a “Snap Ring” retaining system. Filter cages are manufactured with crush resistant reinforcing wires and are zinc plated to insure long life and easy bag removal. Bag cleaning system also has an adequate size air compressor to maintain 100 psi with surge tank. Air system has provisions for heating and cleaning. Filter bags are cleaned by jet pulse with appropriate valves and solid state sequencing timer contained in a NEMA 4 enclosure. NEMA 4 enclosure is also rubber isolated.
Filtration system is of parallel design (versus series design) for more efficient use of available horsepower, thus eliminating any dusting by utilizing separate flow paths for wet and dry modes. Ladders are provided for access to all maintenance areas from ground level. Payload capacity is 20 cubic yards (gross) for round bodies and 22 cubic yards (gross) for square bodies.
The safety of the people working with or on Fast-Vac equipment is of primary concern. Because of competitive pressures not to include various safety ideas as standard equipment. Fast-Vac offers all our safety items as options on this model. We highly recommend that you add as many as your budget allows, to insure that your operators are safely protected.
A. A tailgate support and body chock are provided for both tailgate and body when either is in the “UP” position for service work.
B. All access doors are capable of being locked in the open position.
C. Changeover from wet to dry mode of operation (and visa versa) is accomplished without entering the machine’s interior and with a minimum of operator effort.
D. An audible warning alarm is included in the hydraulic circuit for tailgate open and closed.
E. Safe (non-skid tape) walking surfaces are provided on all areas of the machine requiring operator or maintenance attention.
F. All elevated surfaces are enclosed by fold-up hand rails.
G. A permanently mounted ladder is provided for access to any elevated areas. Ladder starts at ground level.
Fast-Vac reserves the right to change specifications without notice. Download Spec Sheet